Golden Eagle Board Edger

BR-225 Golden Eagle Board Edger

Designed to plane and edge boards in one operation.  25" wide bay allows multiple set ups for higher yield.  Can be customized 13", or 25" wide.

Specifications:

Frame: 3/4" plate sides with 4" x 10" tubing, internal bracing, guards 1/8" plate or heavier.
Arbor:  (3) bearing design, 2 15/16" Sealmaster for long life.  (2) 3/8 “ keys and 5" OD steel spacers transmit horse power effectively.  Chrome hardened chatter plates on both sides of the blades reduce chatter, extends blade life.
Arbor Motor: 75HP
Arbor Belt Drive: 4-groove 5V type belt, designed for up to 75HP.
Saws: Single arbor design utilizes 12" OD saws with 5" spacers.
Spacers: (Extra cost option) 5" OD x 2 15/16" bore x (2) 3/8" keyways.  Machined to any width.
Work Height: (Standard) 36" from floor to top of feed roll.
Material Length: 27" minimum to full length boards.
Planer Head: 6- knife high speed steel design, 6 1/2" cutting circle, 25" wide. 
Knives 5/32" x 1 1/4" x 12 1/2" long or 25" long.
Bearings 2 3/16" Sealmaster, speed 3600 RPM chipbreaker and hold down shoe chrome plated in wear areas.
Planer motor: 50 HP ODP Lincoln 220/440 3-phase with 5-belt banded drive.
Planing Height: Is set by hydraulic pump which raises planer head and all top feed rolls.
Feed Rolls:

 (8) bottom rolls 4" OD. 1 15/16" bearings,
#80 bushed hardened sprockets
(5) top rolls 4" OD. 1 7/16" bearings
#60 hardened sprockets
All rolls machine cut diamond pattern with hard chrome plating for long life.
Feed rolls are square to feed straight ( not canted).
Fences: (Standard) Left fence moveable, right fence fixed.
Hydraulic feed system: (1) 15HP 1800 RPM 220/440 3 phase motor.  Mounts to 15 gallon per minute variable volume hydraulic pump and 30 gallon tank.  Furnished with return line filter, floe meter, (lets operator know feed speed).  This enables operator to select feed speed 40 to 250 feet per minute.
Hydraulic heating element: Heating element designed to heat hydraulic fluid during low temperatures/cold start-up.  Requires 110 power supply.  Wiring and by customer.
Dust pickup: (Standard) 8" round hood over planer head.
4" x 16" rectangular opening on bottom outfeed for saw blades.
(Optional) Bottom open to drop into customers conveyor.
Rubber Tire Feeder: 5' long feeds boards through kickback fingers on edger.  5 1/2" rolls, 1 7/16" bearings and #60 chain.  6" structural frame.  Tires and rolls are powered by hydraulic feed system on edger.