Golden Eagle Chamfer

Designed to chamfer pallet deck boards at high speed rate with low cost per piece. Years of engineering and working with customers have allowed us to maintain a chamfer with a very smooth trouble free feed system.

Specifications:

Frame:
4 X 6 and 4 X 10 tubing with internal bracing motor and arbor base is made of 7/8" plate.

Guards:
All steel and designed for safety and convenience.

Arbor:
10HP TEFC 3600 RPM 220/440 3-phase

Arbor belt drive:
2-belt heavy duty

Chamfer:
Can make typical two chamfer grooves on each side of board. Full length or one side only. Cutters are raised and lowered by air cylinder that is activated by limit switches. Limit switches can easily be adjusted by loosening star handles and moving switch.

Board thickness:
1/2" to 1 1/8"

Board width:
3 1/2" to 8" with proper setting

Board length:
30" minimum to 60" maximum

Feed system:
#80 chain feed with heavy duty dogs, powered by hydraulic unit mounted and electrical wired to frame

Cutter:
10" diameter (8) wing indexable carbide insert. This is an outstanding improvement over all others. Cutters stay sharp longer and run noticeably quieter.

Stacker:
Comes with outfeed accumulator. This is a gravity stacker that slides new board under existing stack. It is a simple and effective way of accumulating boards.

Dust pickup:
4" by 10" rectangular opening over cutter heads.

Feed rate:
Variable speed can easily be turned up to high volume and run with two operators or slowed down to run as one man operation. Controlled by knob on hydraulic unit.

Work height:
33"

* air filter and regulator included.

Electrical:
Complete control panel with main disconnect, fuses for each motor, full voltage starters, control circuit transformer and buttons, all enclosed in NEMA enclosure. Standard electrical package is 440 VAC.